Explanation Of Safety Signal Words; Receipt & Inspection - Ingersoll Rand 2340 Manuel De L'utilisateur

EXPLANATION OF SAFETY SIGNAL WORDS

Indicates an imminently hazardous
DANGER
situation which, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous
WARNING
situation which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous
CAUTION
situation which, if not avoided, may
result in minor or moderate injury or
property damage.
Indicates information or a company
NOTICE
policy that relates directly or indirectly
to the safety of personnel or protection
of property.
RECEIPT & INSPECTION
Ensure adequate lifting equipment is available for unloading and
moving the compressor to the installation site.
WARNING
•
Lifting equipment must be properly rated for the weight of the
compressor. Weight information is printed on a label attached to
the shipping container.
•
Lift the compressor by the shipping skid only.
•
Do not use the motor lifting eye to lift the entire compressor. The
motor lifting eye is for removing the motor from the compressor
only.
•
Do not work on or walk under the compressor while it is
suspended.
Use suitable lifting equipment (i.e. forklift) to lift and transport the
compressor to the installation site. Ensure the lifting equipment,
straps, etc. are capable of supporting the weight of the compressor.
22607402 Rev.F
RELEASED 15/Mar/2018 20:10:54 GMT
Before signing the delivery receipt, inspect for damage and missing
parts. If damage or missing parts are apparent, make the appropriate
notation on the delivery receipt, then sign the receipt. Immediately
contact the carrier for an inspection.
All material must be held in the receiving location for the carrier's
inspection.
Delivery receipts that have been signed without a notation of damage
or missing parts are considered to be delivered "clear. " Subsequent
claims are then considered to be concealed damage claims. Settle
damage claims directly with the transportation company.
If you discover damage after receiving the compressor (concealed
damage), the carrier must be notified within 15 days of receipt and
an inspection must be requested by telephone with confirmation in
writing. On concealed damage claims, the burden of establishing that
the compressor was damaged in transit reverts back to the claimant.
Read the compressor nameplate to verify it is the model ordered, and
read the motor nameplate to verify it is compatible with your electrical
conditions.
Make sure electrical enclosures and components are appropriate for
the installation environment.
Do not use a triple voltage three-phase motor for 200-208 voltage
three phase application. Use a 200 volt motor only.
Lifting Equipment and Straps
EN-3