About This Manual; Safety Information; Explanation Of Safety Signal Words; General Safety Precautions - Ingersoll Rand SS3 Manuel Du Propriétaire

EN
This manual provides safe and reliable instructions for the installation, operation and maintenance of your Ingersoll Rand air
compressor. Carefully read this manual before attempting to operate or perform any maintenance. If you are uncertain about
any of the instructions or procedures provided in this manual, contact Ingersoll Rand. We recommend you retain this manual,
and all publications provided with your air compressor, in a location which is accessible to all personnel who operate and
service your compressed air equipment.
„ EXPLANATION OF SAFETY SIGNAL WORDS
Throughout this manual there are steps and procedures,
which if not followed may result in a hazard. The following
signal words are used to identify the level of potential hazard.
Indicates an imminently
hazardous situation, which if not
DANGER
avoided will result in death or
serious injury.
Indicates a potentially hazardous
situation, which if not avoided
WARNING
could result in death or serious
injury.
Indicates a potentially hazardous
situation, which if not avoided
CAUTION
may result in minor or moderate
injury or property damage.
Indicates information or a
company policy that relates
directly or indirectly to the safety
NOTICE
of personnel or protection of
property.
„ GENERAL SAFETY PRECAUTIONS
INTAKE AIR
Can contain carbon monoxide or other contaminants
Will cause serious injury or death Ingersoll Rand air
compressors are not designed, intended or approved
for breathing air Compressed air should not be used for
breathing air applications unless treated in accordance
with all applicable codes and regulations
HAZARDOUS VOLTAGE
Can cause serious injury or death Disconnect power
and bleed pressure from the tank before servicing
Lockout/Tagout machine Compressor must be
connected to properly grounded circuit See grounding
instructions in manual Do not operate compressor in
wet conditions Store indoors
EN-4
RELEASED 16/Apr/2018 18:50:16 GMT

ABOUT THIS MANUAL

SAFETY INFORMATION

DANGER
WARNING
MOVING PARTS
Can cause serious injury Do not operate with guards
removed Machine may start automatically Disconnect
power before servicing Lockout/Tagout machine
HOT SURFACES
Can cause serious injury Do not touch Allow to cool
before servicing Do not touch hot compressor or
tubing
HIGH PRESSURE AIR
Bypassing, modifying or removing safety/relief valves
can cause serious injury or death Do not bypass,
modify or remove safety/relief valves Do not direct air
stream at body Rusted tanks can cause explosion and
severe injury or death Drain tank daily or after each
use Drain valve located at bottom of tank
RISK OF BURSTING
Use only suitable air handling parts acceptable for
pressure of not less than the maximum allowable
working pressure of the machine
WARNING
WARNING
WARNING
CAUTION
22204911 Rev. D