Additional General Safety Precautions; General Information - Ingersoll Rand SS3 Manuel Du Propriétaire

„ ADDITIONAL GENERAL SAFETY PRECAUTIONS
Compressor must be operated in well-ventilated area.
•
Do not directly inhale compressed air.
•
Do not over pressurize the receiver tank or similar vessel
•
beyond design limits.
Do not use a receiver tank or similar vessels that fail to
•
meet the design requirements of the compressor. For
additional information contact the Ingersoll Rand factory
or the nearest service provider.
Do not drill into, weld or otherwise alter the receiver tank
•
or similar vessels.
Do not remove, adjust, bypass, change, modify or make
•
substitutions for safety/relief valves or other pressure
control related devices.
Do not use air tools or attachments without first
•
determining the maximum pressure recommended for
that equipment.
The air compressor unit is suitable for operating a variety
of air tools. Depending on your application, the following
accessories may be required:
An air line filter for removal of moisture and oil vapor in
•
compressed air.
An in-line lubricator to prolong the life of air tools.
•
22204911 Rev. D
RELEASED 16/Apr/2018 18:50:16 GMT
SAFETY INFORMATION
•
•
•
•
•
•

GENERAL INFORMATION

•
Contact your nearest authorized dealer for more information
on air tools and accessories for your application.
Do not point air nozzles toward anyone.
Do not touch the compressor pump, engine or discharge
tubing during or shortly after operation. These parts
become hot.
Wear eye protection when operating or servicing
compressor.
Do not operate where flammable or explosive liquids
or vapors such as gasoline, natural gas and solvents are
present.
Do not operate with guards or shields removed, damaged
or broken.
Do not remove, paint over or deface decals. Replace any
missing decals.
Separate air transformers which combine the functions of
air regulation and/or moisture and dirt removal.
EN
EN-5