Marking Of The Counterweight; The Marking Of The Counterweight Interface; The Identification Marking Of The Installation - Tractel Guard trac WP Manuel D'installation, D'emploi Et D'entretien

13.4. Marking of the counterweight

The metal plate inserted on the counterweight
(fig. 18) indicates the following marking:
rep. 1: a pictogram indicating that the manual
must be read before installation and use,
rep. 3: the product description: guard trac™
rep. 6: the trademark: Tractel®,
rep. 8: the reference standards: EN13374-A and
ISO14122-3
GB
rep. 9: weight of the counterweight = 25 kg
rep. 10: punches next to the month of manufac-
ture
rep. 11: punches next to the last 2 digits of the
year of manufacture
13.5. The marking of the counterweight
interface
The marking is as follows:
a: the trademark: Tractel®,
h: a pictogram indicating that the manual must
be read before installation and use
18
13.6. The identification marking of the
installation
The identification plate of the installation (fig. 19)
attached to the railing after installation mentions
the following information:
a: the trademark: Tractel®,
b: the designation of the product,
h: a pictogram indicating that the manual must
be read before installation and use.