Correct Positioning Of The Tightening Bracket Depending On The Diameter Of The Wire Rope; Dynasafe™ Mecha 7 - Tractel dynasafe Mecha 7 Manuel D'installation, Utilisation Et Maintenance

2.4. Correct positioning of the tightening bracket depending on the diameter of
the wire rope.
dynasafe™ Mecha 7
2.5.
17 mm wire rope
without the rubber compression pad,
M6 screws (supplied)
M6 screws * 40 mm (x2)
18 mm to 26 mm wire rope
without the rubber compression pad,
M6 screws (supplied)
M6 screws * 50 mm (x2)
Figure 3
Rubber compression pad
GB