Table Des Matières; General Warnings - Tractel dynasafe Mecha 7 Manuel D'installation, Utilisation Et Maintenance

Contents

1. General warnings .................................................................................................................... 2

2. Installation of a dynasafe™ Mecha 7 & 12 load limiters ........................................................... 3
2.1. Components of the load limiter .......................................................................................... 3
GB
2.2. Procedure for installing load limiter ................................................................................... 3
2.3. Positioning the adjusting pin as a function of the effort in the wire rope ............................. 4
2.4. Correct positioning of the tightening bracket depending on the diameter of the wire rope. . 5
2.5. dynasafe™ Mecha 7 ......................................................................................................... 5
2.6. dynasafe™ Mecha 12 ....................................................................................................... 6
3. Operation and adjustment of a dynasafe™ Mecha 7 & 12 load limiter ..................................... 6
3.1. Example & wiring diagram ................................................................................................. 6
3.2. Adjustment of one safety trip point .................................................................................... 7
3.3. Adjustment of a safety trip point and an intermediate trip point .......................................... 8
3.4. Adjustment of a safety threshold and a "Wire rope slack" threshold................................... 9
1. General warnings
1. Reading and fully understanding the technical data sheets relating to this equipment is
essential for the best use of this high technological material that you have received. All the
technical data sheets are available on request.
Before installing and operating dynasafe™ equipment it is essential for the safe and correct
2.
operation of the material that this manual be read and fully understood and that all the
instructions be followed. This manual should be made available to every operator. Extra
copies of this manual will be supplied on request.
The installation and the operation dynasafe™ equipment should only be carried out in
3.
accordance with the appropriate health and safety at work regulations.
Never apply to the dynasafe™ a load or an effort in excess of the working load limit, and
4.
never use it for an operation for which it is not intended.
5. TRACTEL S.A.S declines any responsibility for the consequences of dismantling or altering
the machine by any unauthorized person.
dynasafe™ equipment must not be used in explosive atmospheres.
6.
dynasafe™ equipment must only be used in a system designed for lifting people after
7.
ensuring that the appropriate operating coefficients have be used in accordance with the
current regulations.
Prior to the use of dynasafe™ equipment with complementary equipment relaying the signals
8.
to an operating system, the user or installer of this system should carry out a specific risk
analysis of the operating functions. The appropriate measures should be taken to obviate
risks identified.
2