Setting The Date; Assigning Unit Identifier Number; Adjusting The Screensaver Delay - SciCan HYDRIM M2 G4 Mode D'emploi

5. Instructions for Use (cont.)

5.10 Setting the date

1.
2.
Scroll to
3.
From the DATE screen, use the keypad to set the date. Press
to return to the Setup menu.
4.
To change the format in which the date appears, return to the Setup menu and use
the date displayed in the desired format. Press
the Setup menu.

5.11 Assigning unit identifier number

1.
2.
Scroll to
3.
Using the keypad, select a maximum of 3 digits to be used as the unit's identifier
number. Press
5.12 Resetting the drying counter
The drying counter must be reset when the HEPA filter is changed. To reset the drying
counter, follow these steps:
1.
2.
Scroll to
3.
Select Default 0 to reset.

5.13 Adjusting the screensaver delay

To change the length of time before the screensaver is activated, follow these steps:
1.
2.
Scroll to
3.
Use
time you require, press it. Press
and select DATE.
Date / Time
to scroll to DATE FORMAT. Select it, and follow the prompts to have
Unit No and select.
to save and
EN
and select.
Reset Drying Counter
Screensaver and select.
to scroll through your time options. When you have found the amount of
Date / Time
to save and return to
to return to the Setup menu.
to save and return to the Setup menu.
20
to save and
EN