Wi-Fi Tcp Communication Card - Ingeteam INGECON SUN STORAGE 1Play Manuel D'installation

Connecting optional accessories

16.2.3. Wi-Fi TCP communication card

The Wi-Fi TCP communication card is installed inside the unit to provide a wireless network interface.
Follow the steps below to connect the communications card:
1. Connect the communication card in the J11 and J12 connectors of the control card.
2. In the lower part of the inverter, remove the cable gland for the Reset button and install said button (see
"2.7. Description of cable inlets").
3. Install the antenna in the dedicated cable gland (see "2.7. Description of cable inlets").
4. Connect the Reset button and the antenna to the communication card. Use the provided extension cable
for the Reset button.
ABH2013IQM01_C - Installation and Operation Manual
J11
J12
Ingeteam
EN
ES
FR
PT
49