Ethernet Tcp Communication Card - Ingeteam INGECON SUN STORAGE 1Play Manuel D'installation

Ingeteam

16.2.2. Ethernet TCP communication card

The Ethernet TCP communication card is installed inside the unit to provide an Ethernet network interface.
Follow the steps below to connect the communications card:
1. Connect the communication card in the J11 and J12 connectors of the control card.
2. Insert the wiring to the unit through the cable inlets provided in the lower part of the inverter (see "2.7.
Description of cable inlets").
3. Connect the Ethernet (A) cabling to the communication card.
48
A
Ethernet TCP communication card
Connecting optional accessories
J11
J12
ABH2013IQM01_C- Installation and Operation Manual