Medela Magic InBra Rental Mode D'emploi page 30

Problem
Breast pump
lights flashing
30
unexpectedly (3 or
more flashing at the
same time)
The breast
pump battery
gets depleted
prematurely
or unexpected
changes in settings
occur (e.g. vacuum
level changes)
If the device is not functioning as expected, turn the pump off and proceed with factory reset
by pressing and holding the Power and the Start/Pause button for 10 seconds.
If you have not resolved the problem with your breast pump or you have further questions,
please contact Medela Customer Service. For contact data visit www.medela.com. Under
"Country" choose your country.
Solution
• The Magic InBra™ Rental breast pump regularly checks
its system to ensure everything is working correctly and to
detect any unauthorized changes or security breaches. In
case of a failure, the pump generates an error and may stop
working.
• Turn the pump off and proceed with a factory reset by
pressing and holding the Power and the Start/Pause button
for 10 seconds.
• If you have not resolved the problem with your breast pump
or you have further questions, please contact Medela
Customer Service for assistance.
• Turn the pump off and proceed with a factory reset by
pressing and holding the Power and the Start/Pause button
for 10 seconds.
• If you have not resolved the problem with your breast pump
or you have further questions, please contact Medela
Customer Service for assistance.