Medela Magic InBra Rental Mode D'emploi page 17

9.1 Operating your breast pump
The Magic InBra™ Rental breast pump may be worn with your regular nursing bra. Ensure
that the bra you are wearing supports the breast pump securely in place while avoiding
excessive compression on your breast. Try loosening the bra strap or switching to a more
stretchy bra if you experience discomfort.
1.
Ensure to turn on
the breast pump
before inserting
the pump in your
bra.
To turn on your
breast pump,
press and hold
the power button
until the lights
switch on.
3.
Tunnel light is on to help you align the nipple.
2.
Flashing white; pumping side to be selected
Solid white; side has been selected
4.
Position the
pump on your
breast.
Ensure that
your nipple is
centered in the
breast shield
tunnel.
The breast pump can
be used on the left
breast or the right
breast. Press the Left
selection button or
the Right selection
button to select
which breast you are
going to pump.
Hold the pump
firmly against your
breast and press the
Start/Pause button.
The pump begins
in the Stimulation
phase. The + button
will be flashing
while the vacuum is
ramping up.
Tunnel light will switch off after 10 sec of pumping.
17