Medela Magic InBra Rental Mode D'emploi page 27

Problem
Increase Vacuum (+)
button not working
Vacuum does not
feel strong enough
even at high vacuum
levels
Solution
• The highest vacuum levels can only be reached when milk
has completely filled up the breast shield tunnel.
• Ensure that the breast shield is completely sealed against the
breast and that there is nothing in between the breast and
the shield (for eg. clothes, bra etc.)
• Ensure to boil all parts except the motor unit before first use
for proper sealing.
• If the solutions above do not work, disassemble the breast
pump following the instructions in chapter 11. Ensure all
parts are clean, dry and not damaged.
• Reassemble the breast pump correctly, following instructions
in chapter 8.
• The highest vacuum levels cannot be reached until the milk
has filled up the breast shield tunnel completely.
• It is possible that the membranes and valves are not
assembled correctly. Ensure to assemble all parts according
to chapter 8.
- Ensure to assemble all parts according to chapter 9.
Yellow valve
Grey shield valve
27