Medela Magic InBra Rental Mode D'emploi page 12

7.1 Cleaning overview
Motor Units
12
Accessory set
Cleaning the Transport Case
• Wipe the outside of the transport case with a towel dampened in soapy water whenever
needed.
• Do not remove the foam inserts. If you notice any stains on the foam, do not wash them.
Protect each motor unit in a separate clean food-safe plastic bag before placing them
into the transport case.
The motor unit is not waterproof. Do not immerse in water.
Wipe before first use and as needed by following the steps
below:
1. Unplug the breast pump from the power outlet and close the
cap of the charging port. Confirm that the breast pump is
switched off before cleaning.
2. Wipe with a clean towel dampened with warm soapy water.
3. Wipe with a clean towel dampened with cold water.
4. Wipe dry with a clean, dry towel.
Always disassemble, pre-rinse and wash all parts before first
use and after each use.
Disinfect the washed parts before first use and once per day
after use.
Information
See chapter 7.2 for detailed cleaning guidance.