Peg-Perego Primo Viaggio All In One Mode D'emploi page 62

Securing the child in the booster seat
Warning! Use only the vehicle's lap and shoulder belt system when restraining the child
in the booster seat.
Make sure that your child is sitting comfortably, with the back fully against the backrest of
the booster seat. Pull the vehicle belt and make sure that the lap portion of it passes into
the low guides (a).
Thread the diagonal part of the vehicle belt in the green router located below the headrest.
To do this turn the belt upside down (b) and slide it from inside toward the outside of the
wings (c). Check that the belt is not twisted when doing this operation.
d
c
b
a
- 62 -