Peg-Perego Primo Viaggio All In One Mode D'emploi page 50

Installing The Child Restraint In A Vehicle
FORWARD FACING INSTALLATION USING UAS
Open the rear compartment and pull the top tether out.
Unsnap the upholstery in the seating area. Take the latch strap out of the compartment
under the seat and thread the latch strap into the red belt guides following instruction at
page 18, 19, 20.
Attach the connectors to the seat anchorage system of the vehicle (a - click).
Push on the seat (b) and at the same time pull the free end of the latch strap (c), so to tighten
the seat as much as possible as shown in the picture. In order to pull more efficiently, let the
free end of the strap through the opening so that it is oriented parallel to the anchor strap
as shown in the picture.
a
a
- 50 -