Peg-Perego Primo Viaggio All In One Mode D'emploi page 60

Use of a Locking Clip
Important! For different types of seat belts,
please refer to page 41 and on.
B
This child restraint should not be installed on
seat types shown on page 34.
When installing this child restraint, the seat
A
belt must be locked at a fixed length for a
safe install. A locking clip may be used to lock
a seat belt if a switchable locking retractor
is not present (as described on page 39).
Should your seat belt require a locking clip,
please contact Peg Perego Customer Service.
To install the locking clip:
1. Route the seat belt through the belt guides
on the seat, following the seat belt installation
instructions for the applicable mode of use:
rear facing mode. Buckle the seat belt.
- 60 -