Securing your child into the child restraint
HARNESS USE AND ADJUSTMENT
This child restraint uses a integrated 5-point
harness system to secure your child. Before
placing your child in the seat, open the
harness following instruction at page 25.
Check if your child needs any of the filler
cushions (page 27).
Put your child in the child restraint with his/
her bottom and back flat against the child
restraint.
Bring the two shoulder straps over your
child's shoulders. Make sure that the straps
are not twisted behind the backrest or over
your child's chest. Make sure that the belt is
snugly fitted around your child's body.
With the child in the seat, adjust headrest
height.
Headrest can be adjusted in 12 position,
position 1 being the lowest and position 12
being the highest. To adjust the headrest,
refer to page 24.
- 56 -