Further Information; Torques - Rose File Plus Manuel D'instructions

8.3

Further information

For further information on spare parts, tightening torques and exploded-view drawings for your frame, please refer to the
frame details on rosebikes.com/services/service/manuals.
Want to adjust, replace or service components yourself and according to your own requirements? If you are certain that
you have sufficient knowledge and skills for it, you will find all necessary information about these tasks on the respective
manufacturer's website. Please bear in mind that you take responsibility for all jobs carried out by yourself.
At https://www.rosebikes.com/manuals, "Frame Details" are available for each bike model. Here you will find all spare
parts, torque values and other specific details for your bike.
Here are some links to the websites of popular manufacturers:
Bosch: https://www.bosch-ebike.com/
Shimano: https://si.shimano.com/
Rock Shox / SRAM: https://www.sram.com/en/service
DT Swiss: https://www.dtswiss.com/en/support
Fox: https://www.ridefox.com/fox17/help.php?m=bike&t=tuningtips
e*thirteen: https://www.ethirteen.com/
8.4

Torques

All nuts and bolts must be tightened with an appropriate torque wrench. Proper use prevents overtightening and breaking
of the bolts.
Components
Seatpost clamp
Stem
Brake calliper mounting front wheel
Front axle
Rear axle
Cassette lockring
Rear derailleur bolt
Derailleur hanger at the frame
Brake rotor bolts
Centre lock brake disc lockring
Crank bolt
Pedals
Operating elements at the handlebar
Threaded eyelets on the frame
*The torque value must not be exceeded. As a rule, a lower torque is sufficient for a secure hold. Especially when using
assembly paste, the necessary torque is often much lower, because the solid particles in the lubricant significantly
increase the friction.
Tip: The lower the torque value of the bolt, the less stress it puts on the component, which is especially important with
carbon components.
Manufacturer / Torque
Model
ROSE max. 4 Nm
Steerer clamp: max. 6 Nm
ROSE
Handlebar clamp: max. 6 Nm
all 6 Nm
all See manufacturer's instructions
all 12 Nm
all 40 Nm
SRAM transmission 35 Nm
SRAM UDH 8-10 Nm
UDH 25 Nm
all 6.2 Nm
all 40 Nm
SRAM 54 Nm
e*thirteen 40 - 45 Nm
35 Nm
all
See torque value indicated*
all Pay attention to additional instructions from
the handlebar manufacturer!
- 2 Nm*
55