Setting The Saddle Height - Rose File Plus Manuel D'instructions

3.2

Setting the saddle height

DANGER
Raising the seat post above the minimum insertion mark or inserting it below the maximum mark may cause
accidents or damage!
If the seat post is not inserted to the minimum insertion mark, it may break or damage the frame. If exceeded, the frame
may be damaged.
• Do not under any circumstances insert the seat post less than the minimum insertion depth of 10 cm!
• The maximum insertion depth depends on the frame size and must not be exceeded.
1. Open the seat post clamp.
2. Change the height of the saddle by sliding the seat post up or down and make sure the saddle is straight.
→ The minimum insertion depth is 10 cm.
3. Tighten the bolt of the seat clamp to a maximum torque of 4 Nm.
4. Get on your bike and check whether the saddle height is right.
→ It should be safe to get on and off the bike.
→ Make sure your toes can touch the ground when standing.
42