Installing The Pedals - Rose File Plus Manuel D'instructions

3.3

Installing the pedals

One of the pedals has a right- and the other a left-hand thread.
Most pedals have the letter "L" and "R" stamped on for the mounting side. Some pedals come with a groove in
the left pedal axle.
For more details see the manufacturer's manual.
1. Check if your bike was supplied with washers and slide both
washers onto the pedal axles – if present.
2. Turn the left pedal anti-clockwise to screw it into the thread of
the left crank arm and tighten the pedal to a torque of 35 Nm.
3. Turn the right pedal clockwise to screw it into the thread of the
right crank arm and tighten the pedal to a torque of 35 Nm.
35 Nm
35 Nm
43