Tyre Pressure; Further Information - Rose SNEAK PLUS Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

8.2

Tyre pressure

The maximum tyre pressure depends on tyre width and inner rim width. You can use the tyre and rim manufacturers'
specifications when adjusting the tyre pressure. Do not exceed the maximum tyre pressure!
On many bikes, it makes sense to choose a tyre pressure that is lower than the maximum pressure for a more
comfortable ride. The minimum tyre pressure is also marked on the tyre sidewall and you should not fall below this value
either.
8.3

Further information

For further information on spare parts, tightening torques and exploded-view drawings for your frame, please refer to the
frame details on rosebikes.com/services/service/manuals.
Want to adjust, replace or service components yourself and according to your own requirements? If you are certain that
you have sufficient knowledge and skills for it, you will find all necessary information about these tasks on the respective
manufacturer's website. Please bear in mind that you take responsibility for all jobs carried out by yourself.
8.4
Torques
All nuts and bolts must be tightened with an appropriate torque wrench. Proper use prevents overtightening and breaking
of the bolts.
Components
Seatpost clamp
Stem
Brake calliper bolts front and rear wheel
Front axle
Rear axle nuts
Cassette lockring
Mounting bolt rear derailleur
Mounting bolts brake discs
Centre lock brake disc lockring
Mounting bolt of crank
Bottom bracket
Pedals
Operating elements at the handlebar
Threaded eyelets on the frame
*The torque value must not be exceeded. As a rule, a lower torque is sufficient for a secure hold. Especially when using
assembly paste, the necessary torque is often much lower, because the solid particles in the lubricant significantly
increase the friction.
Tip: The lower the torque value of the bolt, the less stress it puts on the component – this is especially important with
carbon components.
Manufacturer,
Torque
Model
all
5 Nm
Handlebar clamp: 6 Nm
Ergotec Piranha
Steerer clamp: 9 Nm
all
6 Nm
all
15 Nm
all
35 Nm
all
40 Nm
all
10 Nm
all
6.2 Nm
all
40 Nm
all
See torque value indicated
BSA
40 Nm
35 Nm
all
See torque value indicated*
all
Pay attention to additional instructions from the
handlebar manufacturer!
-
2 Nm*
57

Publicité

Table des Matières
loading

Table des Matières