Tyre Pressure - Rose The Bruce Manuel D'instructions

Components
Task
Brake
Check the brake pads for wear
→ The brake pad on the metal
backing plate must be at least
0.5 mm thick.
Check the brake rotor for wear.
→ Minimum thickness of brake
rotors: 1.5 mm
Bleed brake / replace brake fluids
Wheels
Hub maintenance:
See manufacturer's instructions for
maintenance tasks.
Check the rim tape for damage.
The rim tape must be replaced when
• the rim tape is coming off of the rims.
• the print is coming off and the
material underneath is visible.
• there is significant inwards buckling
around the spoke holes and lots of
wrinkles in the rim tape.
Check the spoke tension and whether it
is running or showing wear, if necessary
true the wheel(s).
Tyres
Check tyres
Shifting /
Check the wear of the chain with a
drive unit
chain wear indicator.
→ The chain needs replacing
when the chain wear indicator
measurements indicates the
maximum permitted stretch.
The chainrings and the cassette should
also be replaced when replacing the
second chain.
* More frequently if malfunctioning or subject to intense use.
6.2

Tyre pressure

The maximum tyre pressure depends on tyre width and inner rim width. You can use the tyre and rim
manufacturers' specifications when adjusting the tyre pressure. Do not exceed the maximum tyre pressure!
On many bikes, it makes sense to choose a tyre pressure that is lower than the maximum pressure for a more
comfortable ride. The minimum tyre pressure is also marked on the tyre sidewall and you should not fall below this
value either.
Monthly / Quarterly /
20 hours 60 hours
X
X
X
Yearly / Other /
200 hours Notes
*
X *
X *
X
X *
*
X *
37