Tyre Pressure; Further Information - Rose BACKROAD+ Manuel D'instructions

8.2

Tyre pressure

The maximum tyre pressure depends on tyre width and inner rim width. You can use the tyre and rim
manufacturers' specifications when adjusting the tyre pressure. Do not exceed the maximum tyre pressure!
On many bikes, it makes sense to choose a tyre pressure that is lower than the maximum pressure for a more
comfortable ride. The minimum tyre pressure is also marked on the tyre sidewall and you should not fall below this
value either.
8.3

Further information

For further information on spare parts, tightening torques and exploded-view drawings for your frame, please refer
to the frame details on rosebikes.com/services/service/manuals.
Want to adjust, replace or service components yourself and according to your own requirements? If you are certain
that you have sufficient knowledge and skills for it, you will find all necessary information about these tasks on
the respective manufacturer's website. Please bear in mind that you take responsibility for all jobs carried out by
yourself.
Here are some links to the websites of popular manufacturers:
Sram: https://www.servicearchive.sram.com/service
Shimano: https://si.shimano.com/
DT Swiss: https://www.dtswiss.com/support/
Newmen: https://www.newmen-components.de/en/17/service/
Ritchey: https://eu.ritcheylogic.com/
8.4 Torques
All nuts and bolts must be tightened with an appropriate torque wrench. Proper use prevents overtightening and
breaking of the bolts.
Components
Saddle clamp
Brake calliper bolts front and rear wheel
Front axle
Rear axle
Cassette lockring
Mounting bolt rear derailleur
Mounting bolts brake discs
Centre lock brake disc lockring
Mounting bolt of crank
Bottom bracket
Pedals
Operating elements at the handlebar
Threaded eyelets on the frame
*The torque value must not be exceeded. As a rule, a lower torque is sufficient for a secure hold. Especially when
using assembly paste, the necessary torque is often much lower, because the solid particles in the lubricant
significantly increase the friction.
Tip: The lower the torque value of the bolt, the less stress it puts on the component, which is especially important
with carbon components.
60
Manufacturer, Torque
Model
all See torque value indicated*
all 6 Nm
all See manufacturer's instructions
all See manufacturer's instructions
all 40 Nm
all 10 Nm
all 6.2 Nm
all 40 Nm
all
See torque value indicated
BSA 40 Nm
35 Nm
all
See torque value indicated*
all Pay attention to additional instructions from the
handlebar manufacturer!
- 2 Nm*