Publicité
2.8 Safety-conscious work
In addition to the safety instructions in this operating manual, the accident prevention
regulations and possibly internal work, operational and safety instructions of the operating
company / owner must be observed.
2.9 Responsibility of the operating company / owner
Compliance with the following points is the responsibility of the operating company /
owner:
- The plant has to be operated for the intended use only when it is in proper condition.
Ä Chapter 2.2 "Intended use"
- The function of the protection devices, e.g. touch protection device of coupling and fan
wheel, must not be impaired.
- Maintenance intervals have to be adhered to and malfunctions have to be immedi-
ately removed. Malfunctions have to be removed on ones own only if measures are
described in this operating manual. Qualified persons are in charge of all other mea-
sures – contact the factory service, if necessary.
- The type plate of the plant has to be checked for completeness and readability.
Ä Chapter 9.1 "Type plate"
- Personal protective equipment must be sufficiently available and be worn. Ä Chap-
ter 2.4 "Personal protective equipment"
- The operating manual has to be made available at the place of operation in a readable
and complete way.
- Only qualified and authorised personnel may be employed. Ä Chapter 2.3 "Selection
and qualification of persons"
54
SANICUBIC 1 FRK
English
Publicité
