Publicité
ATTENTION:
1. Do not install or operate the device in the vicinity of radiators, heat accumulators,
furnaces, or other heat sources. Ensure that the device is always installed in such
a way that it is sufficiently cooled and cannot overheat.
2. Do not place ignition sources such as burning candles near the device.
3. Ventilation openings must not be covered, and fans must not be blocked.
4. Use the original packaging or packaging provided by the manufacturer for trans-
port.
5. Avoid shock or impact to the device.
6. Observe the IP protection class, as well as the ambient conditions such as tempe-
rature and humidity according to the specification.
7. Devices can be continuously further developed. In the event of deviating informa-
tion on operating conditions, performance, or other device properties between
the user manual and the device labelling, the information provided on the device
always has priority.
8. The device is not suitable for tropical climates and for operation at heights of 2,000
m above sea level or higher.
9. Unless explicitly stated, the device is not suitable for operation in marine condi-
tions.
PLEASE NOTE:
For conversion or retrofit sets or accessories provided by the manufacturer, it is
essential to observe the included instructions.
CAUTION! IMPORTANT INFORMATION ON LIGHTING PRODUCTS!
1. This device is a risk group 2 device. Do not stare at the light source! Do not stare at
the light beam! Do not look directly into the lamp with optical instruments such as
magnifying glasses or binoculars!
2. Stroboscopic effects may cause epileptic seizures in susceptible individuals!
3. Permanently installed lamps are built into these lighting units. These may not be
replaced by the user. The lamps contained in this light source may only be replaced
by the manufacturer, its service partner, or a similarly qualified person.
RADIO SIGNAL TRANSMISSION
(FOR EXAMPLE, W-DMX OR AUDIO RADIO SYSTEMS):
Radio signal transmission (for example, W-DMX or audio radio systems):
The quality and performance of wireless signal transmissions generally depends on
the ambient conditions.
For example, the following factors can impact range and signal stability:
Shielding (for example, masonry, metal structures, water)
High volumes of radio traffic (for example, powerful wireless LAN networks)
Interference
9
Publicité
