Publicité
RDM unique identifier
Error display in case of malfunction
QUICKLIGHT
Set up a scene quickly and easily using the basic moving head functions without an external
controller. Starting from the main display, press MENU to access the main menu. Use ⏶ or ⏷ to
select Quicklight and confirm with ENTER. Now select the desired sub-menu item, confirm, set
the value as required, and confirm again.
If the Quicklight operating mode is activated, the display does not automatically change to the
main display; when leaving the Quicklight menu, Quicklight operating mode is automatically
terminated. The settings in the Quicklight menu are retained until the next restart of the fixture;
as a result, Quicklight can be accessed repeatedly with the same settings as long as the fixture
remains switched on. After a restart, the values are reset to the factory settings.
24
Display of the temperature of the corresponding
component
Set the temperature unit
Display of relative humidity in per cent
Display the speed of the corresponding fans
Total operating time
Time in use
Lamp operating time
Operating time since the last reset of the service
operating time
Publicité
