Ego Power+ LM2240SP Manuel D'utilisation page 53

PROBLEM
The mower
does not mulch
properly.
The mower
unexpectedly
stops while
mowing.
56-VOLT LITHIUM-ION CORDLESS 22" LAWN MOWER — LM2240SP/LM2240SP-FC
CAUSE
◾
Wet grass clippings are sticking
to the underside of the deck.
◾
The mower is set to cut too much
grass at once.
◾
The blade speed mode is not set
properly.
◾
The battery pack(s) charge is
depleted.
◾
Mower is overloaded and the
overload icon on the LCD screen
flashes.
◾
Mower deck is clogged with
grass and debris.
◾
The battery pack(s) or mower
circuitry is too hot. If the battery
pack(s) is overheated only
the overheat icon flashes. If
the mower is overheated the
overheat icon and blade icon
flash simultaneously.
◾
The blade speed mode is not set
properly.
◾
The service icon, self-propel
icon and blade icon flash
simultaneously.
SOLUTION
◾
Wait until the grass dries before
mowing.
◾
Raise the deck to a higher
cutting-height setting.
◾
Select the blade speed to a
lower setting.
◾
Charge the battery pack(s).
◾
Check if grass has accumulated
beneath the deck and clean if
needed. Raise the cutting height
or slow down the mowing.
◾
Unclog the mower deck. Raise
the cutting height and/or cut a
narrower swath.
◾
Allow the battery pack(s) or
mower to cool down.
◾
Select the blade speed to a
lower setting.
◾
Contact EGO Customer Service.
53