LCD
No.
Display
7
8
MOWER HIGH-TEMPERATURE PROTECTION
If the mower temperature exceeds 194 °F (90 °C) during operation, the temperature-
protection circuit will immediately shut off the mower to prevent overheating damage.
The overheat icon and blade icon on the LCD screen will flash simultaneously. Release
the blade rotation trigger and wait until the overheated mower cools down, then restart
the mower.
MOWER OVERLOAD PROTECTION
To prevent overload conditions, do not try to remove too much grass at one time. Slow
down your stride or raise the cut height.
Your mower has built-in overload circuit protection. When the mower is overloaded, the
motor will stop and the overload icon on the LCD screen will flash. Remove the battery
pack(s) from the mower. Check to see if grass has collected beneath the deck and clear
it if necessary, then install the battery pack(s) and restart the mower.
38
56-VOLT LITHIUM-ION CORDLESS 22" LAWN MOWER — LM2240SP/LM2240SP-FC
Description
Handle error icon,
self-propel icon and
blade icon flash
simultaneously.
Handle error icon
and blade icon flash
simultaneously.
The service icon,
self-propel icon and
blade icon flash
simultaneously.
Meaning
The handle is not
in an operating
position.
The side rails are not
fully extended.
Mower electronics
error.
Action
Stop the mower
and make sure
that the handle
is in one of
the operating
positions.
Stop the mower
and make sure
that the side
rails are fully
extended.
Contact EGO
customer
service.