Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
PROBLEM
The mower
or self-propel
system fails to
start.
The mower cuts
unevenly.
Short runtime of
the mower with
included battery.
52
56-VOLT LITHIUM-ION CORDLESS 22" LAWN MOWER — LM2240SP/LM2240SP-FC
CAUSE
◾
The battery pack(s) charge is
depleted.
◾
The battery pack(s) is not
properly inserted into the battery
compartment.
◾
The handle is not locked in an
operating position and the handle
error icon on the LCD screen
flashes.
◾
The mower deck is clogged with
grass and debris.
◾
The self-propel speed dial is in
the lowest (OFF) position.
◾
The blade is dull.
◾
The grass-cutting height is not
set properly.
◾
The blade is installed incorrectly.
◾
The blade speed mode is not set
properly.
◾
Grass conditions and cutting-
height setting will greatly affect
the battery run time. The claimed
run time is based on a light load
condition.
◾
The blade speed mode is not set
properly.
SOLUTION
◾
Charge the battery pack(s).
◾
Insert the battery pack(s) into
battery compartment until you
hear a "click".
◾
Stop the mower and make sure
that the handle is locked in one
of the operating positions.
◾
Clean the mower deck and
ensure that the blade set has
freedom of movement.
◾
Slightly rotate the self-propel
speed dial forward, then press
the self-propel trigger.
◾
Sharpen or replace the blade.
◾
Move the deck height to a higher
setting.
◾
Re-install the blade, following
the section "REPLACING THE
BLADES" in this manual.
◾
Select a proper blade speed
mode.
◾
Raise the blade height and slow
your pace to reduce the cutting
load.
◾
Select a slower blade speed
mode.
Publicité
