Battery And Charger; Setting Up The Bath Lift - Invacare Aquatec KOGIA Manuel D'utilisation

C Plate, backrest
D
Spindle foot

Battery and charger

A
Battery
B
Charger

3.3 Setting up the bath lift

WARNING!
Risk of slipping!
The bath lift can slip if the suction cups do not have a
proper hold.
– Clean the bathtub and the suction cups with a damp
cloth before setting up the bath lift.
– Do not change the position of the bath lift in the
bathtub once it is set up.
1584939-A
A
A
B
C
E
H
WARNING!
Risk of injury and damage!
– Only set up the bath lift in bathtubs that comply with
the specifications of the following table.
– Only use the bath lift in bathtubs with frontal
overflows.
A
C
80 mm
B
Tub length, ³ 800 mm
bottom (inside)
Tub width, min. 280 mm
bottom (inside)
Tub width, at ³ 430 mm
80 mm in height
(inside)
Tub width 700 - 740 mm
(outside)
Tub height £ 420 mm
(inside) (with height adapter max. + 60 mm)
Setup
E
H
9