Charging The Battery - Invacare Aquatec KOGIA Manuel D'utilisation

IMPORTANT!
Risk of damage!
Damage to the product caused by the spindle foot
slipping out.
– Ensure that the spindle is fully retracted and the
spindle foot is level and not twisted, before folding
up the backrest.
– Once the backrest is folded up, ensure that the spindle
foot is in the spindle foot retainer.
4. Hold the backrest at the center of the head end and carefully
lift it into the end position.
5. Hold the charged battery B by the grip A and insert it into
the guide C of the backrest from above.
6. Push the battery completely down.
The battery should click into place.
The bath lift is now ready for use.
1584939-A
IMPORTANT!
Risk of damage
– Make sure that the backrest does not touch the bath
tub edge.
– Place the bath lift further forwards in the bath tub,
if necessary.

3.4 Charging the battery

The bath lift cannot be used when the battery is charging.
WARNING!
Risk of electric shock
– Only recharge the battery in dry rooms at room
temperature (15 °C to 25 °C) and never in the
bathroom.
IMPORTANT!
– Only use the supplied charger to charge the battery.
– Make sure that the voltage specifications shown on
the charger correspond to those of the mains supply.
– Only connect the charger to mains supply when the
battery is connected to the charger.
Setup
11