Charging The Battery - Invacare Aquatec ORCA Manuel D'utilisation

4. Hold the backrest at the center of the head end and
carefully lift it into the end position.
5. Plug the jack socket with the unlocking sleeve C
on the spiral cable B of the hand control A to the
jack plug D until the locking mechanism engages
noticeably.
IMPORTANT!
Risk of damage
– Make sure that the backrest doesn't touch the
bath tub edge.
– Place the bath lift further forwards in the bath
tub, if necessary.

3.4 Charging the battery

The bath lift cannot be used when the battery is charging.
1574469-B
Pre-release Rev. B.00
WARNING!
Risk of electric shock
– Only recharge the battery in dry rooms at room
temperature (15 °C to 25 °C) and never in the
bathroom.
IMPORTANT!
– Only use the charger supplied to charge the
battery in the hand control.
– Only connect the charger to the mains when
the hand control is connected to the charger.
– Make sure that the voltage specifications
shown on the charger correspond to those of
the mains supply.
A
F
E
1. Insert the jack plug F of the charger C into the jack
socket E on the spiral cable D of the hand control A
until it engages.
2. Insert the mains plug B of the charger into a power
socket.
B
G
C
D
Setup
13