Charging The Battery - Invacare Aquatec ORCA Manuel D'utilisation

IMPORTANT!
Risk of damage
Damage to the product due to incorrect assembly
of the backrest.
– Make sure that both hooks B of the backrest
engage into the hinges C of the seat plate.
– Make sure that the backrest is folded up to
the end position without exerting force and
noticeable resistance. The end position is
indicated in the following graphic.
Orca / Orca XL
1574469-C
Orca F
4. Hold the backrest at the center of the head end and
carefully fold it up to the end position.
5. Plug the jack socket with the unlocking sleeve C
on the spiral cable B of the hand control A to the
jack plug D until the locking mechanism engages
noticeably.
IMPORTANT!
Risk of damage
– Make sure that the backrest doesn't touch the
bath tub edge.
– Place the bath lift further forwards in the bath
tub, if necessary. To place the bath lift further
forwards in the bath tub lower the bath lift to
the bottom, loosen the suction cups and then
move the bath lift.

3.4 Charging the battery

The bath lift cannot be used when the battery is charging.
Setup
13