Lenze EMZ9371BC Instructions De Mise En Service page 95

Main menu
No. Display
EDK9371BC DE/EN/FR 3.1
Parameterisation 8200 vector/8200 motec
Submenus
No. Display
5.15 Vector−Ctrl 7
5.15.1 FIF managem
5.15.2 Freq setpt
5.15.3 f limit/ramp
5.15.4 Motor param
5.15.5 Motor ident
Sensorless torque control with speed limitation
5.16 Torque−Ctrl 0
5.16.1 Torque setpt
5.16.2 f limit
5.16.3 Motor param
5.16.4 Motor ident
5.17 Torque−Ctrl 1
5.17.1 Torque setpt
5.17.2 f limit
5.17.3 Motor param
5.17.4 Motor ident
l
Menu structure
Description Description
Operation with the fieldbus function
module on FIF (DRIVECOM control)
Frequency setpoint via process data
channel
Set up fieldbus communication
Frequency setpoint configuration
Output frequency, acceleration time
and deceleration time configuration
Motor current control and motor
monitoring configuration
Motor parameter identification
Analog selection of torque setpoint
via analog input 1 (AIN1)
Speed limitation via maximum
frequency C0011
Torque setpoint configuration
Speed limitation configuration
Motor current control and motor
monitoring configuration
Motor parameter identification
Analog selection of torque setpoint
via parameter channel possible
(C0047)
Speed limitation via maximum
frequency C0011
Torque setpoint configuration
Speed limitation configuration
Motor current control and motor
monitoring configuration
Motor parameter identification
7
95