Lenze EMZ9371BC Instructions De Mise En Service page 103

Main menu
No. Display
11 LECOM/AIF
EDK9371BC DE/EN/FR 3.1
Parameterisation 8200 vector/8200 motec
Submenus
No. Display
Only active for standard devices from software version 2.2:
You need to change to the code level to be able to display the signal levels
at the terminals. The signal levels of the analog inputs and outputs are
evaluated with an offset and a gain.
10.13 Monit AIN1
10.14 Monit AIN2
10.15 Monit AOUT1
10.16 Monit AOUT2
10.17 Monit PTC
10.18 Monit DIGIN
10.19 Monit DIGOUT
11.1 LECOM setup
11.2 AIF setup
11.3 Status words
l
Menu structure
Description Description
Level at analog input 1
0 ... 100 % (referring to C0034)
Level at analog input 2
0 ... 100 % (referring to C0034)
Level at analog output 1
0 ... 100 %
(referring to standard I/O: 10 V)
(referring to application I/O: C0424)
Level at analog output 2
0 ... 100 % (referring to C0424)
Status of PTC input
0 º open, 1 º closed
Status of digital inputs and status of
input for controller inhibit X3/28
0 º LOW, 1 º HIGH
Status of digital outputs and status of
NO contact of relay outputs:
0 º LOW, 1 º HIGH
Configuration for operation with
communication modules
Serial interface
Process data
Status word display
7
103