Lenze EMZ9371BC Instructions De Mise En Service page 104

7 Parameterisation 8200 vector/8200 motec
Menu structure
Main menu
No. Display
12 FIF−systembus
104
Submenus
No. Display
12.1 CAN managem
12.2 Cfg CAN−IN1
12.3 Cfg CAN−OUT1
12.4 Cfg CAN−IN2
12.5 Cfg CAN−OUT2
12.6 Status words
12.7 CAN diagn
Only active for standard devices from software version 2.2:
You need to change to the code level to be able to display the contents of
the data words. The contents of the data words are displayed as
hexadecimal values.
12.8 Mon IN1 W1−2
12.9 Mon IN1 W3−4
12.10 Mon OUT1 W1−2
12.11 Mon OUT1 W3−4
12.12 Mon IN2 W1−2
12.13 Mon IN2 W3−4
12.14 Mon OUT2 W1−2
12.15 Mon OUT2 W3−4
l
Description Description
Configuration for operation with the
system bus (CAN) function module
and display of the contents of the
CAN objects
Only active with the system bus
(CAN) function module
CAN communication parameters
CAN object 1
CAN object 2
Status word display
CAN diagnostics
Contents of the 4 input words/output
words of CAN object 1
Analog words: 5DC0h º 480 Hz
Digital words: Hexadecimal
representation of the individual bits
Contents of the 4 input words/output
words of CAN object 2
Analog words: 5DC0h º 480 Hz
Digital words: Hexadecimal
representation of the individual bits
EDK9371BC DE/EN/FR 3.1