Publicité
Les langues disponibles
Les langues disponibles
DAILY MAINTENANCE
1. Visual Inspection:
• Before each workout, visually inspect the spinning bike for any visible damage or loose components.
Pay attention to the frame, pedals, resistance knob, and electronic components if applicable.
2. Clean and Wipe Down:
• After your workout, wipe down the bike with a clean, damp cloth to remove sweat, dust, and debris. Pay
special attention to the handlebars, saddle, and frame.
• Ensure that no moisture or sweat remains on the bike's surface to prevent corrosion.
3. Check Pedals and Cleats:
• Examine the pedals for signs of wear or damage. Tighten any loose pedals as needed.
• Inspect the cleats on your cycling shoes for wear and ensure they are securely fastened to maintain a
secure connection with the pedals.
WEEKLY MAINTENANCE
1. Belt Tension and Alignment:
• Check the tension of the belt. It should be snug but not overly tight. Adjust as necessary following the
manufacturer's recommendations.
• Ensure that the belt is correctly aligned to prevent excessive wear and noise. Adjust it if needed.
2. Seat and Handlebar Adjustment:
• Check that the seat and handlebars are securely fastened and properly adjusted to your preferred
settings. Verify that all adjustment levers and knobs are tightened before each ride.
3. Electronics and Console:
• Test the functionality of electronic components, such as the console, heart rate monitor, or any other
built-in features. Ensure that the display is functioning correctly.
• Replace batteries in electronic components if they are low or dead.
MONTHLY MAINTENANCE
1. Brake Pads:
• Inspect the emergency break pads for wear. Replace the brake pads if they show significant signs of
wear or have become ineffective.
2. Frame and Bolts:
• Conduct a comprehensive inspection of the frame, bolts, and fasteners. Tighten any loose bolts to
maintain the stability of the bike during use.
3. Magnetic Resistance System
• Your bike has a magnetic resistance system, check its smooth operation. Ensure that the resistance
adjustments are functioning correctly.
MAINTENANCE
S2 MAGNETIC SPINNING BIKE
35
Publicité
