Ascend S2 Manuel D'utilisation page 12

ASSEMBLY INSTRUCTIONS
STEP 4
1. First, insert the saddle post (7) into the bike frame (16). Secure it in place by
turning a single L-shaped knob (9) until it aligns with the holes on the saddle
post (7). Don't worry about the height for now; you can adjust it later to your
preference.
2. Next, insert the saddle support (6) into the saddle post (7) as shown in the
picture. Lock it in place using a single adjustment knob (8). Don't worry about
the exact position at this point; you can adjust it later to suit your needs.
3. Finally, insert the saddle (5) into the saddle support (6), ensuring it's aligned
properly with the bike. Tighten it securely with the provided open-end wrench
(3).
12
S2 MAGNETIC SPINNING BIKE