Ascend S2 Manuel D'utilisation page 18

ASSEMBLY INSTRUCTIONS
STEP 10
1. Identify the left and right pedals (13) by looking for the engraved letters 'L' for Left and
'R' for Right on them.
Take note of the warning tags in the crank arm's holes and remove them.
2. Locate the left pedal marked with an 'L' and insert it by turning the left crank arm
counterclockwise using your fingers. This is done to ensure the threads align correctly
and you are screwing the pedal in the right direction. Note: Failure to follow this step may
damage the crank arm's threads, void the warranty, and result in additional repair costs.
When you can't easily insert the left pedal using your fingers, use the open-end wrench
tool (3) to firmly secure the pedal onto the crank arm.
3. Insert the pedal lock nut (27) into the pedal thread from the inside of the crank arm,
and start by turning it with your fingers to ensure it aligns correctly. When you can no
longer turn the nut with your fingers, use the open-end wrench (4) to fully tighten it. Be
sure to keep applying pressure to the pedal with the open-end wrench (3) to prevent it
from unscrewing during this process.
4. Repeat the same process for the right pedal (13), screwing it in a clockwise fashion.
Remember to start by using your fingers for this step.
18
S2 MAGNETIC SPINNING BIKE