Ascend S2 Manuel D'utilisation page 19

MOVING YOUR ASCEND S2 MAGNETIC SPINNING BIKE
1. Safety First: Before moving the Ascend S2 Magnetic Spinning Bike, it is crucial to ensure that the
power supply is completely disconnected to prevent any accidental activation.
2. Positioning: Stand in front of the bike with enough space to maneuver. Ensure you have a firm footing.
3. Handlebar Grip: With both hands, grip the handlebars securely. Make sure your grip is firm, and your
fingers are wrapped around the handles.
4. Pulling Towards You: While maintaining your grip on the handlebars, gently pull the bike towards you
and downward. This action will cause the front wheels to make contact with the ground.
5. Rolling: With the front wheels on the ground, you can now easily roll the Ascend S2 Magnetic Spinning
Bike to your desired location. Make sure to handle it with care to avoid any damage or strain.
6. Final Position: Once you have moved the bike to its new location, slowly let it go back down while
keeping a firm grip on the handles. Ensure that it is properly positioned and stable. It is essential to set it
on a level surface for safe and effective use.
By following these steps, you can relocate your Ascend S2 Magnetic Spinning Bike safely and conve-
niently. Always prioritize safety and proper handling when moving exercise equipment.
MOVING
S2 MAGNETIC SPINNING BIKE
19