Scope Of Delivery And Device Overview - DS Produkte PC-P002-1 Mode D'emploi

❐ Only connect the charger to a properly installed socket. The socket must also be
easily accessible after the device has been connected. The mains voltage must cor-
respond to the technical data of the charger (see chapter "Technical data"). Only use
proper extension cords, whose technical data correspond to those of the charger.
❐ Make sure that the connected cord does not pose a tripping hazard, is not crushed or
kinked and does not come into contact with hot surfaces.
❐ In the event of a storm, disconnect the mains adapter from the socket.
❐ Always pull on the charger itself and never on the cable!
❐ The main unit must be turned off when connecting or disconnecting the charger.
❐ The device may only be placed on the charging station if the dust bin is completely
empty.

Scope of delivery and device overview

Battery-operated vacuum cleaner
1
2
3
4
5
6
7
8
Suction nozzles
Brush nozzle: Use the brush adapter to dust delicate objects such as
picture frames, lamp shades, keyboards, books etc.
Tile nozzle: Use the tile nozzle to vacuum clean fabric folds, tiles, cor-
ners, nooks and crannies or other hard-to-reach areas.
Wet nozzle: You can use this nozzle to vacuum up small quantities of
liquids (e.g. spilt mineral water).
1 Suction opening
2 Dust bin
3 Insert with gasket and fi lter
9
4 Button for releasing the dust bin
5 Main unit
6 On/Off switch
7 Handle
8 Charge indicator light
9 Connector jack for the charger
Not shown: Charger, material for mounting
the charging station
18