Elcometer NDT PTG6 Mode D'emploi page 33

18 TECHNICAL SPECIFICATION
Model
Thickness
b
Range
Accuracy
Resolution
Measurement
Rate
Gauge Memory
Operating
Temperature
Power Supply
h
Battery Life
Gauge Weight
Gauge
Dimensions
Can be used in accordance with: EN 14127, EN 15317
b
Thickness range is dependent on the material being measured and the transducer used.
h
When in continuous reading mode at a reading rate of 4 Hz. Rechargeable batteries may differ.
www.elcometer.com
All manuals and user guides at all-guides.com
PTG6
Interface Echo:
Echo-Echo ThruPaint™: 0.15 - 10.15mm (0.006 - 0.4")
Plastic Mode:
±1% or 0.015mm, whichever is the greater
(±1% or 0.001", whichever is the greater)
0.1mm (0.01") or 0.01mm (0.001") switchable
4 Hz (4 readings per second)
8 Hz (8 readings per second)
16 Hz (16 readings per second)
None
-10 to 50°C (14 to 122°F)
Alkaline: Approximately 15 hours
Lithium: Approximately 28 hours
210g (7.4oz)
- including batteries, without transducer
145 x 73 x 37mm (5.7 x 2.87 x 1.46")
1.65 - 25.40mm (0.065 - 1")
0.15 - 5.00mm (0.006 - 0.197")
100,000 readings in up to
1,000 batches
2 x AA batteries
R
PTG8
- without transducer
32