Elcometer NDT PTG6 Mode D'emploi page 32

R
16 SPARES & ACCESSORIES (continued)
16.4 ULTRASONIC COUPLANT
For the gauge to work correctly, there must be no
air gap between the transducer and the surface of
the material being measured. This is achieved by
using a couplant.
A 120ml (4fl oz) bottle of couplant is supplied as
standard with each gauge, other sizes are
available to purchase separately.
Description
Ultrasonic Couplant; 120ml (4fl oz)
Ultrasonic Couplant; 300ml (10fl oz)
Ultrasonic Couplant; 500ml (17fl oz)
Ultrasonic Couplant; 3.8l (1 US Gallon)
16.5 TRANSDUCER ADAPTOR
This adaptor allows single element,
'non-intelligent' transducers from
Elcometer - see Section 16.1
'Transducers' on page 28 - and other
manufacturers' transducers with Lemo
connectors, to be used with the PTG
product range.
Simply plug the adaptor into the transducer connection point at the
base of the gauge to connect any 'non-intelligent', single element
transducer and follow the on-screen instructions.
Description
Single Element Transducer Adaptor
17 WARRANTY STATEMENT
PTG gauges are supplied with a 12 month warranty against
manufacturing defects, excluding contamination and wear. The
warranty can be extended to two years within 60 days of purchase
via www.elcometer.com.
Transducers are supplied with a 90 day warranty.
31
All manuals and user guides at all-guides.com
Sales Part Number
T92015701
T92024034-7
T92024034-8
T92024034-3
Sales Part Number
T92025657
www.elcometer.com