Elcometer NDT PTG6 Mode D'emploi page 30

R
16 SPARES & ACCESSORIES (continued)
The PTG range is supplied as a gauge only or complete with
15.0MHz, 1/4" single element transducer (TXC15M0CM) with 9mm
and 12mm acrylic delay lines.
When choosing a transducer, the frequency, diameter and material
under test should be considered.
Part Number
TXC15M0CM
TXC20M0CM
Key
T/P = Thin Plastics
(Graphite delay line required)
A = Aluminium
Other transducers are available which can be connected to PTG
gauges using a transducer adaptor - see Section 16.5 'Transducer
Adaptor' on page 31. For a complete list of transducers, visit
elcometerndt.com
16.2 DELAY LINES
Each gauge is supplied complete with 9mm and 12mm acrylic delay
lines suitable for measuring on steel, aluminium and titanium.
If measuring on thin plastics using Plastic Mode (PLAS), a graphite
delay line must be used. These are available to purchase as
optional accessories.
Description
Acrylic Delay Line; 1/4 Dia x 9mm
Acrylic Delay Line; 1/4 Dia x 12mm
Graphite Delay Line; 1/4 Dia x 3/8"
29
All manuals and user guides at all-guides.com
Frequency Diameter
15.0MHz 1/4"
20.0MHz 1/4"
Suitable for Measuring
T/P S A
ü ü ü
ü ü ü
S = Steel
T = Titanium
Sales Part Number
T92016528
T92016529
T92023853-4
www.elcometer.com
T
ü
ü