Elcometer NDT PTG6 Mode D'emploi page 2

R
CONTENTS
1 Gauge Overview
2 Box Contents
3 Using the Gauge
4 Getting Started (including Display Modes)
5 Setting Limits - PTG8
6 Calibration Methods
7 Calibrating Your Gauge
8 PIN Lock
9 Taking a Reading
10 Batching - PTG8
11 Reviewing Batch Data - PTG8
12 Menu Structure - PTG6
13 Menu Structure - PTG8
14 Downloading Data - PTG8
15 Upgrading Your Gauge
16 Spares & Accessories
17 Warranty Statement
18 Technical Specification
19 Legal Notices & Regulatory Information
20 Appendix 1: Preparing The Test Surface
Hg
Pb
For the avoidance of doubt, please refer to the original English language version.
Gauge Dimensions: 145 x 73 x 37mm (5.7 x 2.87 x 1.46") - without transducer
Gauge Weight: 210g (7.4oz) - including batteries, without transducer
A Material Safety Data Sheet for the ultrasonic couplant supplied with the Elcometer PTG6 & PTG8 and available
as an accessory, is available to download via our website:
www.elcometer.com/images/stories/MSDS/Elcometer_Ultrasonic_Couplant_Blue.pdf
© Elcometer Limited 2015. All rights reserved. No part of this document may be reproduced, transmitted, transcribed,
stored (in a retrieval system or otherwise) or translated into any language, in any form or by any means (electronic,
mechanical, magnetic, optical, manual or otherwise) without the prior written permission of Elcometer Limited.
1
All manuals and user guides at all-guides.com
www.elcometer.com