Choose to assemble the wing with or without the leading edge slats to suit your flying style. For optimized high speed performance we recommend flying without the
slats. For maximum slow speed performance we recommend installing the slats.
With Slats
1. Carefully remove all the foam slat pocket covers (A) from the wing.
2. When the pocket is exposed, carefully apply medium CA to each slat pocket.
3. Mount the slat onto the wing with the rounded edge facing forward. Ensure
that the left and right slats are on the correct wing half. The slat and wing
halves are labeled with "L" and "R" indicators.
A
Apply CA
Glue Here
Wing Installation
1. Insert the wing joiner tube (B) and slide the left and right wing halves together, as
shown.
2. Secure the wing together using the wing bracket (C).
Without Slats
1. Locate the rectangular decals on the decal sheet
2. Apply the decals over the slat mounting locations.