Safety Functions; Reverse Gear Buzzer; Hopper Lifting/Lowering Lever Locking Device; Suction Inlet And Broom Lifting/Lowering Lever Locking Device - Nilfisk Advance RS 501 Instructions D'utilisation

ENGLISH

SAFETY FUNCTIONS

The machine is equipped with the following safety functions.

REVERSE GEAR BUZZER

The machine is equipped with a sensor and a buzzer to indicate that the machine is moving in reverse.

HOPPER LIFTING/LOWERING LEVER LOCKING DEVICE

The hopper lifting/lowering lever can be activated only after having lifted the locking device fl ange.

SUCTION INLET AND BROOM LIFTING/LOWERING LEVER LOCKING DEVICE

The suction inlet and broom lifting/lowering lever can be activated only after having lifted the locking device fl ange.

SENSOR FOR ENGINE START-UP INHIBITION WHEN THE DRIVE PEDAL IS PRESSED

The machine is equipped with a sensor that does not allow for engine start up when the drive pedal is pressed.

BATTERY MANUAL DISCONNECTION

The machine is equipped with a manual battery release device to protect the machine when it is stored for long periods, during
maintenance or when it is left unattended.
SENSOR FOR ENGINE START-UP INHIBITION WHEN THE OPERATOR IS NOT ON THE DRIVER'S
SEAT
The machine is equipped with a sensor that does not allow for engine start up when the operator lifts from the driver's seat for more
than 2 seconds and the parking brake is disengaged. The engine can be started if the operator is not on the driver's seat but the
parking brake is engaged.

EMERGENCY PUSH-BUTTON

The machine is equipped with an emergency push-button to stop the engine in case of immediate danger.

MAIN ALARM BUZZER

The machine is equipped with a buzzer that sounds when one of the main alarms occurs (see Alarm Description paragraph).
42
INSTRUCTIONS FOR USE
33019745(2)2009-12 RS 501