Button Function - Dogtra RB1000 Serie Notice D'utilisation

Transmitter Battery Charging Receptacle & Rubber Plug
Located on the backside of the transmitter, the charging
receptacle is covered by a rubber plug. Insert one end of
the battery charging cable into the receptacle to char ge
the battery (See Battery Charging Procedure on page
64).
After charging is completed, close the receptacle with
its rubber plug to make sure dirt or water does not get
inside.
54

BUTTON FUNCTION

Lccate
Run/Point
Point
Sound
The transmitter for the Dogtra RB 1000 Series has five
buttons (two on the face of the transmitter, two on the
left side, and one on the right side).
"Run/Point" Button
The Run/Point button is located on the front of the
transmitter. If you push down the Run/Point button,
the unit causes double beep every 7 seconds while the
dog is running. While the dog is on point or stationary it
double beeps every 2 seconds.
ON/OFF
Switch
55