Button Function - Dogtra RB 1000 Série Notice D'utilisation

Transmitter Battery Charging Receptacle & Rubber Plug
Located on the backside of the transmitter, the charging receptacle
is covered by a rubber plug. Insert one end of the battery charging
cable into the receptacle to char ge the battery (See Battery
Charging Procedure on page 64).
After charging is completed, close the receptacle with its rubber
plug to make sure dirt or water does not get inside.
52

BUTTON FUNCTION

Lccate
Run/Point
Point
Sound
The transmitter for the Dogtra RB 1000 Series has five buttons
(two on the face of the transmitter, two on the left side, and one on
the right side).
"Run/Point" Button
The Run/Point button is located on the front of the transmitter.
If you push down the Run/Point button, the unit causes double
beep every 7 seconds while the dog is running. While the dog is
on point or stationary it double beeps every 2 seconds.
ON/OFF
Switch
53