Dogtra RB 1000 Série Notice D'utilisation page 29

"Point" Button
The Point button is below the Run/Point button on the front of
the transmitter. The unit will not beep while the dog is moving
in case the Point button is pressed (you can use the Locate mode
for locating your dog); however when the dog points or becomes
stationary, the unit will emit a double beep every 2 seconds.
(Orange Collar : double beep, Green Collar : single beep)
"Locate" Button
The "Locate" button is located on the left side. It causes the
collar's beeper horn to emit a series of beeps when the button is
pushed and it gives you the ability to keep track of your dog's
location. The current selected sound lasts as long as the Locate
button is pushed down, for up to 12 seconds.
54
"Sound" Button
The Sound button is located below the Locate button on the left
side of the transmitter. It has four different sounds.
Initial Beeper
Mode
Sound
- Dog running :
Run/
Double beep every 7 seconds.
Point 2 Beeps
- Dog on-point :
Mode
Double beep every 2 seconds.
Point-
-Dog running : Remains Silent
Only 1 Beep
-Dog on-point : Double beep every
Mode
* NOTE : The locate button can still be utilized in whichever
mode you choose.
* NOTE : Orange Collar : double beep
Green Collar : single beep
LCD
Action
screen
r-P
- P -
55